CHAPTER 3 SYMBOLOGIES
Introduction
This chapter describes symbology features and provides the programming bar codes for selecting these
features.
The decoder is shipped with the settings shown in
. If the default values suit
requirements, programming is not necessary.
Scan the appropriate bar codes in this guide. These new values replace the standard default
values in memory.
Select a host type (see each host chapter for specific host information) after the power-up beeps sound. This is
only necessary upon the first power-up when connected to a new host.
To return all features to default values, scan the
. Throughout the
programming bar code menus, asterisks (
*
) indicate default values.
NOTE
Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where the bar code can be seen clearly, and
bars and/or spaces are not merging.
*
Enable UPC-A
(01h)
Feature/Option
*
Indicates Default
Option Hex Value
