Generalmusic 271221, Руководство пользователя

Страница: 19 / 224

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Setting-up 9
Playing with or without the effects
Whether you are playing single Sounds, Performances, Draw-
bars, etc., you’ll find that in all cases one or more effects will be
applied to the sounds you are playing. If you prefer to play with-
out effects, you can instantly bypass the internal digital effects
processors by pressing the FX OFF button.
When the LED is off, the sound(s) will play with their programmed
effects.
When the LED is ON, the sound(s) will play “dry” (without ef-
fects).
The on/off status of the FX OFF button cannot be memorised.
Transposing the instrument up or down
Master Transpose
The TRANSPOSE b/# buttons allow real time pitch adjustments
(transpositions) in steps of one semitone (range
±
24 semitones
= 2 octaves).
• Press the TRANSPOSE # or TRANSPOSE b buttons to raise
(#) or lower (
b) the pitch.
Transp #: Transp
b:
…
The pitch of the instrument is instantly raised (#) or lowered
(
b) one step and a window will appear showing the current
Transpose value (0 = standard pitch).
Press the Transpose # or
b button as many times as neces-
sary until you reach the desired pitch. The display returns to
normal after a few seconds. The LED of the Transpose # or
b button remians on to show that the instrument has been
transposed up or down.
To clear the keyboard transpose setting
• Press both TRANSPOSE buttons at the same time.
Note: Transposing with the #/ b
buttons affects the instrument as a
whole. If, for example, you switch
from Sounds mode to Performance
mode, the Performances will also
play at the new pitch. If you turn
the instrument off, turning on again
will restore normal pitch.