FCS10 RIP-R-STRIPPER
®
FLOOR COVERING STRIPPER
FORM GOM26110801US, VERSION 1.0
English-EN
3
1 INTRODUCTION
Congratulations on your decision to purchase a General Equipment light
construction product. From our humble beginnings in 1955, it has been a
continuing objective of General Equipment Company to manufacture
equipment that delivers uncompromising value, service life and investment
return. Because of this continuous commitment for excellence, many products
bearing the General name actually set the standard by which competitive
products are judged.
When you purchased this product, you also gained access to a team of
dedicated, knowledgeable, support personnel that stand willing and ready to
provide field support assistance. Our team of sales representatives and in-
house factory personnel are available to ensure each General product delivers
the intended performance and product safety you expect. Our personnel can
readily answer your questions or concerns regarding proper applications,
service requirements and warranty related problems.
If you have any questions or concerns about this product, please feel free to
contact our Customer Service Department during normal business hours using
the contact information located on the front cover of this manual. There is no
charge for this service.
Sincerely,
The General Equipment Team
2 INTENDED USE
The RIP-R-STRIPPER is intended for use in removing VCT and linoleum tiles,
soft sheet materials (PVC, rubber, linoleum, etc.), glued carpet, adhesives,
mastics and material residues from dry wood and cement surfaces in a
nonexplosive atmosphere. It is not intended to remove ceramic tile. The
machine is operated by one adult of proper operator experience/skill/ common
sense, height, weight, strength and physical condition. Minors should never be
allowed to operate the RIP-R-STRIPPER.
RIP-R-STRIPPER is classified as a low cost, push style, low power, portable
type machine. The number of practical and/or suitable job applications for this
type machine is limited. Particular job application variables and operator
experience, skill/common sense may require a different type machine, method
and/or process to properly complete job efficiently and safely. Contact
Customer Service Department for specific information regarding suitable job
applications, job sites, flooring conditions and operator experience/
skill/common sense recommendations for RIP-R-STRIPPER BEFORE
utilization.
Never exceed the recommended capacities of the RIP-R-STRIPPER. Refer to
BEFORE OPERATING and SPECIFICATIONS sections in this manual for
more detailed information. Always utilize the correct blades and extension cord
designed for use with the RIP-R- STRIPPER. Use of an incorrect blade or
extension cord can result in property damage and/or personal injury.
3 TRAINING
Develop a comprehensive program for safe RIP-R-STRIPPER operation by
owner(s) and/or operator(s). Program will include, but is not limited to:
instructional operation, requirements, applicable OSHA requirements, local
laws, and regulations, job site safety plus RIP-R-STRIPPER maintenance.
Constantly examine and upgrade program to guarantee owner(s) and/or
operator(s) safety. Each operator must be fully instructed regarding specifics of
this safety program.
4 SAFETY SYMBOLS
SAFETY ALERT SYMBOL & SIGNAL WORDS
The safety alert “general warning” symbol indicates a potential personal injury
hazard. A signal word (DANGER, WARNING, or CAUTION) is used with the
alert symbol to designate the degree or level of hazard seriousness. Other
safety symbols may be used to represent the type of hazard in combination
with “general warning” symbol, in highlighted boxes, or individually.
DANGER:
Indicates a hazard with a high level of risk which, if not voided,
will
result in
death or serious injury.
WARNING:
Indicates a hazard with a medium level of risk which, if not avoided,
could
result
in death or serious injury.
CAUTION:
Indicates a hazard with a low level of risk which, if not avoided,
could
result in
minor or moderate injury.
The following safety alert symbols identify important safety messages in this
manual. When you see these symbols, be alert to the possibility of personal
injury and carefully read the message that follows.
SAFETY SYMBOLS & MEANINGS
Symbol
Meaning
Symbol
Meaning
Action
Required
No Trash
Containers
Read Manual
General Warning
Wear Ear
Protection
Warning,
Flammable
Material
Wear Eye
Protection
Warning,
Explosive
Material
Wear
Protective
Gloves
Warning, Toxic
Material
Wear Safety
Shoes
Warning,
Electricity
Wear Breathing
Protection
Warning, Body
Entrapment
Disconnect
From Power
Warning, Sharp
Element
No Open
Flame
Warning, Floor
Level Obstacle
No Smoking
Warning, Drop
Off
No Active
Mobile Phone
Warning, Slippery
Surface
No Food Or
Drink
5 SAFETY INSTRUCTIONS
OPERATIONAL DISCLAIMER
The manufacturer of this RIP-R-STRIPPER makes no warranty or
guarantee it is merchantable and/or suitable for a specific job application
and that it will have the capability and power required to remove any
specific floor covering from any specific work surface.
•
These safety instructions provide guidelines to promote safety
and efficiency with the RIP-R-STRIPPER.
•
No warranty, guarantee or representation is made by
manufacturer as to absolute correctness or sufficiency of any
information or statement.
•
Safety instructions are intended to deal with common practices
and conditions encountered in use of RIP-R-STRIPPER and are
not intended to be all inclusive.
•
Not following instructions in this manual can result in property
damage, personal injury and/or death.
DANGER
•
This product can expose you to chemicals including
greases, lubrication oils, silica dusts and asbestos which
are known to the State of California to cause cancer and
carbon monoxide (if gasoline engine powered) which can
cause birth defects or other reproductive harm. For more
information:
