the wall. The
icon will appear on the display and the meter
will sound two beeps and begin to measure the distance from
the meter to the wall twice per second. Each measurement will
cause the beeper to sound, and the measurements will be shown
and continuously updated on the bottom line of the display. At the
same time, the second and third display lines continuously
update the meter’s minimum and maximum distance from the
wall during this measurement session.
When you and the meter stop moving, the meter assumes that
the specified distance has been reached and responds by
sounding multiple beeps. The inactivity triggers the 30-second
countdown to laser power off and the 3-minute countdown to
meter power off. The meter’s MIN, MAX and current distance
from the wall values remain on the display (Fig. 6) until the meter
automatically powers off automatically.
Fig. 6. The results of using
continuous measurement
to step off a specified
distance (10m) from a wall
To exit continuous distance
measurement mode
, press the
button. This returns the meter to direct
distance measurement mode.
MEAS
➤
16
u
➤
11.33
10.000
0.112
