En-5
AIR CONDITIONER Wall Mounted Type
OPERATING MANUAL
Timer Operation
Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
1
Turn on the indoor unit by pressing the Start/Stop button.
OPERATION indicator on the indoor unit turns on.
If the indoor unit is already operating, skip this step.
2
Press the “ON” timer button or the “OFF” timer button.
Clock indicator on the remote controller display starts blinking,
and TIMER indicator on the indoor unit turns on.
3
Adjust the time by pressing the “SELECT” button within about 5
seconds, while the clock indicator is blinking.
(About 5 seconds later, the remote controller display returns to
standby screen.)
To cancel the timer and return to the normal operation, press the
“CANCEL” button.
To redo the timer setting, perform step 2 and 3.
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON–OFF or OFF–ON timer.
Either of the timer whose con
fi
gured starting time is closer to the
current time works
fi
rst, and the order of timer operation is displayed
as follows:
Timer
Indicator on remote controller display
ON–OFF timer
OFF–ON timer
The timer that is set later starts counting down after the counting
down of the preceding timer is
fi
nished.
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24 hours.
SLEEP timer
1
Press the “SLEEP” timer button to activate the SLEEP timer.
OPERATION indicator and TIMER indicator on the indoor unit
turns on.
2
Adjust the time by pressing the “SELECT” button within about 5
seconds, while the clock indicator is blinking.
(About 5 seconds later, the remote controller display returns to
standby screen.)
Each time you press the button, the time changes as follows:
9.0
7.0
5.0
3.0
2.0
1.0
0.5
hours
(30 min.)
To repeat the timer, press the “SLEEP” timer button when
indicator is not displayed on the remote controller display.
To help you to fall asleep comfortably and prevent excessive warming
or cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
In HEAT mode
Set
temperature
Set time
1 hour
Set time
1 hour
1.5 hour
30 min.
1 °C 2 °C 3 °C 4 °C
2 °C
1 °C
In COOL or DRY mode
General Information on Operation
Automatic defrosting operation
When outdoor temperature is very low with high humidity, frost
may form on the outdoor unit during the heating operation, and
it could reduce the operating performance of the product.
For frost protection, a microcomputer-controlled automatic
defrost function is equipped in this air conditioner.
If frost forms, the air conditioner will temporarily stop, and
defrost circuit will operate brie
fl
y (maximum of 15 minutes.)
OPERATION indicator on the indoor unit blinks during this
operation.
If frost forms on the outdoor unit after the heating operation, the
outdoor unit will stop automatically after it operates for a few
minutes. Then the automatic defrosting operation starts.
Auto-restart function
In event of power interruption such as a blackout, the air
conditioner stops once. But it restarts automatically and
performs previous operation when the power supply is resumed.
If any power interruption occurs after the timer is set, counting
down of the timer will be reset.
After the power supply is resumed, the TIMER indicator on the
indoor unit blinks to notify you that there has been a timer fault.
In such a case, reset the timer for your opportune time.
Malfunctions caused by other electrical devices:
Use of other electrical appliances such as an electric shaver or
nearby use of a wireless radio transmitter may cause the malfunction
of the air conditioner.
If you encounter such a malfunction, turn off the circuit breaker once.
Then turn it on again, and resume operation by using the remote
controller.
Multi-type air conditioner
This indoor unit can be connected to a multi-type outdoor unit,
and used as a multi-type air conditioner that allows multiple
indoor units to be operated in multiple locations.
The indoor units may be operated simultaneously, in accor-
dance with their respective output.
Simultaneous use of multiple indoor units
• If 2 or more indoor units are operated simultaneously, the
heating and cooling ef
fi
ciency will be less than the ef
fi
ciency in
single use of the indoor unit.
Combined use of other auxiliary heating or cooling apparatus
is recommended.
• Following combinations cannot be performed when multiple
indoor units are operated:
- HEAT mode and COOL mode (or DRY mode)
- HEAT mode and FAN mode
The indoor unit operated afterward stops and the OPERA-
TION indicator
fl
ashes.
• The operating mode (HEAT, COOL, and DRY) of the outdoor
unit is determined by the operating mode of the indoor unit that
is operated
fi
rst. If the indoor unit is started in FAN mode, the
operating mode of the outdoor unit cannot be determined.
For example, if indoor unit (A) is started in FAN mode and then
indoor unit (B) is operated in HEAT mode, indoor unit (A) will
temporarily start operation in FAN mode but when indoor unit
(B) started operation in HEAT mode, the OPERATION indicator
(green) on the indoor unit (A) will begin to blink (1 second on,
1 second off) and go into standby mode. Indoor unit (B) will
continue to operate in HEAT mode.
• In HEAT mode, the top of the indoor unit may become warm
by emitted heat of circulated coolant through the indoor unit,
even if the unit operation is stopped. This is not a malfunction.
9333003047-04_OM.indb 5
9333003047-04_OM.indb 5
12/19/2017 5:10:40 PM
12/19/2017 5:10:40 PM