General Music WK4, Руководство пользователя, Страница: 297 / 376

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Score/Edit Score 22•25
INSERTING LYRICS
Lyrics corresponds to the MIDI Lyrics event. This
type of event is loaded and saved with MIDI files.
Lyrics can be inserted into a new Song in the
following manner:
1. Press F6 («Lyrics») to take the cursor to the
lyrics line (below the staff).
2. Press soft button G («Go to loc...») to go to a
specific measure (bar):
Specify the measure with the DIAL then press ENTER confirm
or ESCAPE to cancel.
3. Move the insertion point to the previous note
or the next note with the soft buttons D («Next
event») and E («Previous event»).
4. Each note is ideally subdivided into 1/16ths.
In addition to syllables at the beginning of the
note (first 1/16th), you can insert syllables in
one of the 1/16ths which follow. Press F8 to
open the syllable insertion zone.
Insertion of the syllable at the second 1/16th
Insertion of the syllable at the third 1/16th
Insertion of the syllable at the fourth 1/16th
The number shown on the left of the inser-
tion zone indicates the current 1/16th. To
move the insertion point to one of the other
1/16ths, use the soft buttons H («<<1/16»)
and F8 («>>1/16»).
To escape and return to the note, press the
soft button E («Previous event»). To escape
and pass to the next note press the soft but-
ton D («Next event»).
At this point, «Next event» and «previous
event» pass from 16th to 16th instead of from
note to note.
5. In this operating mode, the keyboard trans-
forms into a source of alphabetic data (see
the «Data Entry» chapter). Write the required
syllable using the keys of the keyboard.
6. Press soft button F («End phrase») to termi-
nate the verse. The end of the verse is indi-
cated by the “end phrase” symbol ‘I’.
Do not write lines consisting of more than 20
characters. This is to avoid the incorrect
syllabisation of words when you are viewing
lyrics in large type. For example, the word
“Ballgame” may syllabize to “Bal-lgame”, or
“Ballg-ame” or other, instead of “Ball-game”.
7. You can modify a selected syllable by rewrit-
ing it entirely or partially.
To replace one character with another, remain
in Overwrite mode (rectangular cursor). If you
are in Insert mode (cursor in the form of a
vertical line), press note D#2 («INS/OVER»)
to pass to Overwrite mode. Move the cursor
with the DIAL, then insert the new character.
To insert a character without cancelling an-
other, pass to Insert mode. Press note D#2
(«INS/OVER»); the cursor will take the form
of a vertical line. Move the cursor with the
DIAL, then insert the new character. Press
D#2 to return to Overwrite mode.