General Music WK4, Руководство пользователя, Страница: 133 / 376

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Disk 6•21
The Save procedures operate in the direction
RAM –> Destination where the destination can
be Floppy disk or Hard disk.
The WK4 RAM is backed by a rechargeable bat-
tery to safeguard the data when the instrument
is turned off. For security reasons, however, it is
necessary to store your data to floppy disk or Hard
disk with the Save command. The RAM should
be considered as a work area which can be con-
tinually updated, not as a data storage device.
Have a new or used disk ready to save data to.
These can be WK4 format disks or standard MS-
DOS disks for the exclusive storage of MIDI files.
You can also save MIDI Files to WK4 format
disks.
Check that the floppy disk is not write protected -
if so, remove the protection beforehand. If you
forget to do this, the instrument will prompt you
with an appropriate message when you attempt
to save to the disk.
Save operations are characterized by an addi-
tional option: the creation of a new Block if nec-
essary.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
WARNING - Do not save data to the original
disks supplied with the instrument. As a precau-
tionary measure against data loss, always check
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
that your original disks are write protected.
THE GENERAL SAVE PROCEDURE
1. Insert the floppy disk into the drive.
2. Press DISK to open the main Save page.
If the main Save page is not shown, use the
page scroll buttons (
) to open it.
If you are working with the Hard Disk, press
DISK and select the HARD DISK option with
soft button F2.
Save operations
1
2
DISK
H. D
+
F8
F7
F6
F5
F4
F3
F2
F1