General Music WK4, Руководство пользователя, Страница: 296 / 376

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
22•24 Reference Guide
1. Press F5 («Chords») to take the cursor to
the chord line (above the staff).
2. Press the soft button G («Go to loc...») to go
to a specific measure:
Specify the measure with the DIAL then press ENTER to
confirm or ESCAPE to cancel.
3. Move the insertion point to the previous or
next note using the soft buttons D («Next
event») and E («Previous event»).
4. Each note is ideally subdivided into 1/16ths.
In addition to a symbol at the beginning of a
note (first 1/16th), you can insert symbols in
one of the 1/16ths which follow. Press F8 to
open the symbol insertion zone:
Insertion of the symbol at the second 1/16th
Insertion of the symbol at the third 1/16th
Insertion of the symbol at the fourth 1/16th
The number shown on the left of the inser-
tion zone indicates the current 1/16th. To
move the insertion point to one of the other
1/16ths, use the soft buttons H («<<1/16»)
and F8 («>>1/16»).
To escape and return to the note, press the
soft button E («Previous event»). To escape
and pass to the next note press the soft but-
ton D («Next event»).
5. Play the chord below the Split Point. The
chord symbol appears, in the following form:
CMaj, Dmin, E7th...
6. If you want to indicate a bass extension, or a
pedal note, press the function button F («Ex-
tension») and play the alternative chord. The
bass extension will appear in the following
form: CMaj/D, Dmin/G...
Press the soft buttons D («Next event» or E
(«Previous event») to pass to another event.
7. You can modify the selected symbol by play-
ing a different chord.
8. You can modify a chord by transforming it,
for example, from a major to minor chord to
seventh. Press F7 («Root») repeatedly to
alternate between the bass of the chord (the
root: A, B, C, etc.) and the abbreviation of
the chord (min, 7th, dim, aug...).
The entire symbol is selected.
Press F7 («Root»).
The root note is selected.
Press F7 («Root»).
The chord abbreviation is selected.
Press F7 («Root»).
The entire symbol is selected again.
Rotate the DIAL or play another chord to
modify the selected element (the root or ab-
breviation).