Setup Check & Setup Modes
(
con tin ued
)
NOTE
:
Selecting
nA
option for the Card
Test will not inhibit the Fault or A1/A2
alarm circuits in the event of a malfunction
or an alarm condition, during normal
operation.
PASSWORD OPTION
Once the Card Test options have been
selected, the user will either enable or
disable the password option (figure 24). The
display will indicate either
PE
, for enabled
or
Pd
, for disabled. Press the Mode/Select
switch until the desired option is displayed.
Password Disabled is the factory default for
this selection.
ENTERING A NEW PASSWORD
This option applies to the Setup Mode
only:
If the Password is disabled, the unit
will automatically enter the Setup Check
mode. If the Password is enabled, the user
will be able to enter a new password (refer
to the NOTE on page 19). The unit will
display the left digit of the Password on the
display. The right digit will be blank until
the left digit has been selected. Once the left
digit is selected, wait for five seconds.
Next, the right digit will be displayed and
the left digit will be blank until the right
digit has been selected. Once the right digit
has been selected, wait for five seconds
(figure 25).
Fig ure 25
When the Setup Mode is complete, the
Model TA402A will automatically enter the
Setup Check Mode. This allows the
operator to view the newly selected options.
The unit will return to normal operation
after completing the Setup Mode and the
Setup Check Mode.
23
Model TA402A
User Interfaces
Fig ure 24
SETUP LED
FLASHING for SETUP
CHECK MODE
STEADYFOR SETUPMODE
Содержание TA402A
Страница 10: ...6 General Monitors This page left blank intentionally ...
Страница 30: ......
Страница 36: ......
Страница 51: ...44 C 01 96 General Monitors ...