background image

10

7.1 Storing Your Meter and Strip

Meter:

• Avoid bump or violent behavior.

• Do not use in extremely dry environment. It may cause static discharges.

• Do not use under electromagnetic radiation, ex: electrical equipment. 

• Do not disassemble the meter for any reason.

• No modification of this equipment is allowed. 

• Keep meter clean by wiping the exterior appearance with tissues or lint-free cloth.

• Do not expose the meter under lint, dust, sunlight, heat or humid environment. 

Strip:

• Do not store in high humidity environment, or expose directly to sunlight.

• Do not freeze or refrigerate the meter and strips.

• Keep your hand dry and clean while handing the strips and performing the test.

• Do not bend, cut or fold the strips.

7.2 Cleaning and Caring for Your Meter

Please use soft cloth slightly damp with one of the following solution to clean meter surface.

• 75% alcohol

• Super Sani-Cloth disposable wipes

• Mild dishwashing liquid with water

• 10% household bleach solution and 90% water

Note:

• Do not allow any other wet cloth or liquid.

• Do not allow any liquid run in or around the test port and battery cover.

• Make sure the meter is completely dry before use.

• Protection impairment if used in a manner not specified by the manufacturer.

Chapter 7     

 Care and Maintenance

Содержание BeneCheck























Отзывы: