background image

24

25

Note :

●  Please  complete  the  test  procedures  within  3  minutes  or  the  meter  will  
   automatically turn off.
●  Do  not  apply  the  blood  sample  on  the  test  strip  anywhere  other  than  the  
   sample inlet.
●  Do  not  apply  the  blood  sample  to  a  same  test  strip  twice,  it  will  cause  
   inaccurate test results.

3.3 Care after the Test 
Directions :

1.  Follow  the  instructions  for  lancing  device  to  treat  and  discard  the  used  
     disposable lancet into an appropriate sharps or biohazard container.
2.  After  performing  a  test,  remove  the  test  strip  and  meter  will  automatically 
     turned off.
3.  Record the test result and date in your personal diabetes diary.

Note :

●  Please check your system performance regularly or when you suspect your test  
    result is inaccurate.
●  Dropping,  bumping  or  other  violent  impact  may  damage  the  meter  or  cause  
    malfunction.
●  Do  not  use  the  meter  in  an  environment  with  possible  magnetic,  
   electromagnetic, and radioactive interferences.

Warning :

● Do not disassemble the meter for any reason.
● Please  follows  local  regulations  to  discard  used  test  strips  and 
   lancets.
● Used  test  strips,  lancets  and  any  other  materials  which  have 
    been  in  contact  with  blood  should  be  treated  as  potential 
    biohazards.  If  a  user  has  an  infectious  disease,  the  used  test 
   strips and other materials could be sources of infection.

Содержание BENECHECK GLU






















Отзывы: