THANK YOU
for choosing this Excalibur by General
®
International model 90-075
A/B/C Universal Bandsaw Rip Fence System. This Rip Fence System has been carefully tested
and inspected before shipment and if properly used and maintained, will provide you with
years of reliable service. For your safety, as well as to ensure optimum performance and trou-
ble-free operation, and to get the most from your investment, please take the time to read this
manual before assembling, installing and operating the unit.
The manual’s purpose is to familiarize you with the safe operation, basic function, and features
of this Rip Fence System as well as the set-up, maintenance and identification of its parts and
components. This manual is not intended as a substitute for formal woodworking instruction,
nor to offer the user instruction in the craft of woodworking. If you are not sure about the safe-
ty of performing a certain operation or procedure, do not proceed until you can confirm, from
knowledgeable and qualified sources, that it is safe to do so.
Once you’ve read through these instructions, keep this manual handy for future reference.
Disclaimer:
The information and specifications in this
manual pertain to the unit as it was supplied from the
factory at the time of printing. Because we are commit-
ted to making constant improvements, General
®
International reserves the right to make changes to
components, parts or features of this unit as deemed
necessary, without prior notice and without obligation to
install any such changes on previously delivered units.
Reasonable care is taken at the factory to ensure that
the specifications and information in this manual corres-
ponds with that of the unit with which it was supplied.
However, special orders and “after factory” modifica-
tions may render some or all information in this manual
inapplicable to your machine. Further, as several gene-
rations of this model of rip fence system and several ver-
sions of this manual may be in circulation, if you own an
earlier or later version of this unit, this manual may not
depict your tool exactly. If you have any doubts or ques-
tions contact your retailer or our support line with the
model number of your unit for clarification.
GENERAL® INTERNATIONAL
8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3
Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca
