General International BT8005, Руководство по установке и эксплуатации

Страница: 4 / 28

ENGLISH
4
WARNINGS
1. KEEP CORD AWAY FROM HEAT, SHARP EDGES OR MOVING
PARTS.
Replace damaged cords immediately. Damaged cords increase the
risk of electric shock.
2.
DO NOT EXPOSE THIS TOOL TO DAMP OR WET LOCATIONS.
Keep out of rain as it may increase risk of electrical shock.
3. THIS TOOL IS LOUD.
Proper hearing protection should be worn (in accordance with ANSI
S12.6-1997 R2002).
4. THIS TOOL MAY CREATE SMALL PIECES OF DEBRIS.
Proper eye protection should be worn at all times when operating this
tool. Use ANSI approved safety glasses (in accordance with ANSI
Z87.1-2003.) Everyday eye glasses are NOT safety glasses.
5. REMOVE ADJUSTING KEYS OR WRENCHES BEFORE USING THE
TOOL.
A wrench or key that is left attached to a moving part of the tool may
result in personal injury.
6. HOLD TOOL BY INSULATED GRIPPING SURFACES WHEN
PERFORMING AN OPERATION WHERE THE TOOL MAY CONTACT
HIDDEN WIRING OR ITS OWN CORD.
Contact with a live wire will make exposed metal parts of the tool “live”
and could shock the operator.
7.
KEEP AWAY FROM FLAMMABLES.
Do not attempt to operate this tool near flammable materials or
combustibles.
8. KEEP CHILDREN AWAY.
All children should be kept away from the work area. Never let a child
handle a tool without strict adult supervision.
9.
ALWAYS CHECK TO MAKE SURE THAT THE TRIGGER IS NOT ON
BEFORE PLUGGING TOOL IN.
Tool may cause damage to property or person if plugged in while on.
10. KEEP WORK AREA CLEAN AND WELL LIT.
Cluttered or dark work areas invite accidents.
11. DO NOT OPERATE THIS TOOL IF UNDER THE INFLUENCE OF
ALCOHOL OR DRUGS.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not
attempt to operate.
12.
DON’T OVERREACH.
Keep proper footing and balance at all times when operating this tool.
13. ALWAYS DISCONNECT THE TOOL FROM POWER SOURCE
before making any adjustments, storing, servicing, or changing
accessories. Such preventative safety measures reduce the risk of
starting the tool accidentally.
14.
DO NOT USE THE TOOL IF THE SWITCH DOES NOT TURN IT ON
AND OFF.
Any tool that cannot be controlled with the switch is dangerous and
must be repaired.
15. CHECK FOR DAMAGE.
Check your tool regularly. If part of the tool is damaged, it should
be carefully inspected to make sure that it can perform its’ intended
function correctly. If in doubt, the part should be repaired. Refer all
servicing to a qualified technician. Consult your dealer for advice.
16. USE SAFETY EQUIPMENT.
Dust mask, non-skid safety shoes, hard hat, or hearing protection
should be used in appropriate conditions.
CAUTIONS
1. KNOW YOUR TOOL.
Read this manual carefully. Learn the tool’s applications and
limitations, as well as potential hazards specific to it.
!
!