background image

5

AC1220 man 

v.190926

Air Compressor

 Indicates a potentially hazardous situation which, if not avoided, may result in minor 

or moderate injury.

Notice indicates important information, that if not followed, may cause damage to 

equipment.

IMPORTANT SAFETY INFORMATION

 WARNING

•  Read and understand all instructions. Failure to follow all instructions may result in serious injury or 

property damage.

• 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations 

that could occur. Exercise common sense and caution when using this tool. Always be aware of the 

environment and ensure that the tool is used in a safe and responsible manner. 

•  Do not allow persons to operate or assemble the product until they have read this manual and have 

developed a thorough understanding of how it works.

• 

Do not modify this product in any way. Unauthorized modification may impair the function and/or 

safety and could affect the life of the product. There are specific applications for which the product was 

designed. 

•  Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 

industrial equipment. There are certain applications for which this equipment was designed. This product 

will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment 

for a purpose for which it was not intended.

• 

Industrial or commercial applications must follow OSHA requirements.

 WARNING

Prop 65

This product can expose you to chemicals including DEHP, which is known to the State of California to 

cause cancer and birth defects or other reproductive harm.  

For more information go to www.P65Warnings.ca.gov.

 WARNING

Work Area Safety

• 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, 

wet, or dark work areas can result in injury. Using the product in confined work areas may put you 

dangerously close to cutting tools and rotating parts.

• 

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence 

of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable 

liquids, gases, or dust.

•  Do not allow the product to come into contact with an electrical source. The tool is not insulated and 

contact will cause electrical shock.

•  Keep children and bystanders away from the work area while operating the tool. Do not allow children to 

handle the product. 

• 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work 

area. Some of these hazards may be hidden from your view and may cause personal injury and/or 

property damage if contacted.

• 

Keep your work area clean and well lit. Ensure floors are not slippery from wax or dust.

•  The compressed air directly from your compressor is not safe for breathing. The air stream may contain 

carbon monoxide, toxic vapors, or solid particles from the air tank. Breathing these contaminants can 

cause serious injury or death. Never use air obtained directly from the compressor to supply air for 

human consumption. The compressor is not equipped with suitable filters and in-line safety equipment 

for human consumption.

• 

Never drill into, weld or make any modifications to the air tank or its attachments. Never attempt to repair 

a damaged or leaking air tank. Replace with a new air tank.

• 

The air tank is designed to withstand specific operating pressures. Never make adjustments or parts 

substitutions to alter the factory set operating pressures.

• 

Over inflation of tires could result in serious injury and property damage. NOTE: Air tanks, compressors 

and similar equipment used to inflate tires can fill small tires very rapidly. Adjust pressure regulator on air 

supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the 

tire gauge to prevent over inflation.

CAUTION

NOTICE

Содержание AC1220





















Отзывы: