![General International 90-290 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/general-international/90-290/90-290_setup-and-operation-manual_2210450008.webp)
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
UNPACKING
• Extra person for help with lifting
• Phillips screwdriver
• Flat head screwdriver
• Feeler gauge set
• Combination square
ADDITIONAL REQUIREMENTS FOR SET UP
The protective coating on the saw table prevents rust from
forming during shipping and storage. Remove it by rub-
bing with a rag dipped in kerosene, mineral sprits or paint
thinner. (Dispose of potentially flammable solvent-soaked
rags according to manufacturer’s safety recommenda-
tions.)
A putty knife, held flat to avoid scratching the surface, may
also be used to scrape off the coating followed by clean-
up with solvent. Avoid rubbing the saw’s painted surfaces,
as many solvent-based products will remove paint.
To prevent rust, apply a light coating of paste wax or
use regular applications of any after-market surface pro-
tectant or rust inhibitor.
CLEAN UP
Tip: With a screw driver, push a solvent-saturated rag into
the T-slots to remove the grease so the miter gauge will
slide freely.
8
LIST OF CONTENTS
QTY
A-
BANDSAW (NOT SHOWN) ........................................... 1
B-
MITER GAUGE STORAGE BRACKET ............................. 1
C-
HANDWHEEL HANDLE* ................................................ 1
D-
WOOD SCREW* ........................................................... 3
E-
HEX NUT* ...................................................................... 3
F-
RIP FENCE STORAGE BRACKET .................................... 1
G-
EYEBOLT* (
Model 90-380 only)
..................................... 2
H-
WOODEN AUXILIARY FENCE* ..................................... 1
I-
FOOT BRAKE (
Model 90-290 only)
................................ 1
J-
MITER GAUGE .............................................................. 1
K-
12-14 MM OPEN END WRENCH* ................................ 1
L-
3 MM ALLEN KEY* ....................................................... 1
M-
4 MM ALLEN KEY* ....................................................... 1
N-
6 MM ALLEN KEY* ....................................................... 1
O-
8 MM ALLEN KEY* (
Model 90-290 only) .......................... 1
P-
PUSH HANDLE ............................................................... 1
Q-
10 MM OPEN END WRENCH* .................................... 1
R-
FRONT FENCE LOCK KNOB * ...................................... 2
S-
SQUARE NUT* ............................................................... 2
Note: Deluxe Excalibur Universal Bandsaw Rip Fence System
is packaged separately. Refer to the manual supplied in the
box with the Excalibur Rip Fence for complete list of contents.
*
Packaged in the box with the Excalibur Rip Fence System.
B
F
I
J
P
C
*
D
*
E
G
*
H
*
L
*
M
*
N
*
Q
*
R
*
S
*
O
*
K
*
*