10
BEFORE ASSEMBLING, MAKE SURE THAT THE SWITCH IS IN THE ”OFF” POSITION AND THAT THE POWER CORD IS
UNPLUGGED. DO NOT PLUG IN OR TURN ON THE MACHINE UNTIL YOU HAVE COMPLETED THE ASSEMBLY AND
INSTALLATION STEPS DESCRIBED IN THIS SECTION OF THE MANUAL.
INSTALLING THE DOWNFEED HANDLE (CONTINUED)
5.
Secure the handle by tightening jam nut
A
.
INSTALLING A BLADE
1.
To install a blade, remove the screw
A
on the guard
using a 4 mm Allen key.
2.
Detach the guard arm and slide open the guard.
A
There are a variety of different types of blades on the market to suit various cutting applications. Your results may vary
based on usage, experience and personal preference. Ask your local tool dealer for suggestions for 14” x 1 1/4” (350 X
32 mm) cold cut blades. Please note that General International offers an optional a 14” hi-speed steel general purpose
blade (
#60-355
).
Note: See section ”Parts list and diagrams” for the blade specifications.
3.
Secure the downfeed handle by tightening two
jam nuts with a wrench.
4.
Turn the handle so that the trigger points up.
6.
Connect the trigger control cable to the electrical
box on the motor as shown.
A
