General International 30-460, Инструкция по эксплуатации и перечень запасных частей

Страница: 1 / 38

FEATURES
• Cast-iron breaker system. Three “v” belts drive the cutterhead.
• Large control knob of variable speed feed system to
increase or decrease speed when the planer is in operation.
• Metric and SAE graduation scale to indicate workpiece
thickness on the front of the machine.
• The anti-kickback finger system at the front of the machine
eliminates any risk of stock being forcibly ejected.
• A dust chute with its 6” outlet to receive a dust collector.
• Magnetic control with overload protection.
SPECIFICATIONS
ˇ
TABLE SIZES
MAXIMUM PLANING WIDTH
MAXIMUM PLANING THICKNESS
MINIMUM PLANING THICKNESS
MINIMUM PLANING LENGTH
MAXIMUM PLANING DEPTH
CUTTERHEAD DIAMETER
KNIVES
CUTTERHEAD SPEED
FEEDING SPEED (VARIABLE)
CUTS PER INCHE (25.4 mm)
MOTOR
M2
M3
WEIGHT
MODEL 30-460 / 30-460HC
25
1
⁄
4
” x 28” (660 x 711 mm)
24” (610 mm)
8” (203 mm)
3
⁄
16
” (4.75 mm)
8” (203 mm)
5
⁄
16
” (8 mm)
3
1
⁄
8
” (80 mm)
/
3
5
⁄
16
” (84 mm)
3
/
HELICAL
4800 RPM
20 TO 38 FPM (6 TO 11.6 M/MIN)
62.5/20 FPM TO 33/38 FPM
/
---
10 HP, 220 V, 3 Ph
10 HP, 600 V, 3 Ph
1015 LBS (460 kg)