General Equipment EP8HL Скачать руководство пользователя страница 8

Safety Precautions

MODEL EP8HL PORTABLE AIR
VENTILATION BLOWER.

THE 

FOLLOWING 

SAFETY 

PRECAUTIONS

PROVIDE  SOME  COMMON  SENSE  GUIDES  TO
PROMOTE  SAFETY  AND  EFFICIENCY  WITH  THE
BLOWER.  NO  WARRANTY,  GUARANTEE  OR
REPRESENTATION 

IS 

MADE 

BY 

THE

MANUFACTURER  AS  TO  THE  ABSOLUTE
CORRECTNESS  OR  SUFFICIENCY  OF  ANY
INFORMATION  OR  STATEMENT.  THESE  SAFETY
PRECAUTIONS  ARE  INTENDED  TO  DEAL
PRINCIPALLY  WITH  COMMON  PRACTICES  AND
CONDITIONS ENCOUNTERED IN THE USE OF THE
BLOWER  AND  ARE  NOT  INTENDED  TO  BE  ALL
INCLUSIVE.  PROPER  LEVELS  OF  OPERATOR
EXPERIENCE,  SKILL  AND  COMMON  SENSE  ARE
ESSENTIAL 

FOR 

SAFE 

AND 

EFFICIENT

OPERATION.  THE  BLOWER  IS  DESIGNED  FOR
PORTABLE  AIR  VENTILATION  PURPOSES  ONLY.
THE 

BLOWER 

IS 

NOT 

DESIGNED 

FOR

TRANSPORTING  LIQUID,  SEMI-SOLID  OR  SOLID
MATERIALS.   INCORRECT USE  OF THE  BLOWER
CAN RESULT IN AN ELECTRICAL SHOCK AND/OR
ELECTROCUTION.  ALWAYS  OPERATE  THE
BLOWER IN COMPLIANCE WITH CURRENT OSHA
AND 

NATIONAL 

ELECTRIC 

CODE®

REGULATIONS.

INCORRECT USE OF THE BLOWER CAN RESULT
IN  PROPERTY  DAMAGE,  PERSONAL  INJURY  OR
EVEN  DEATH.  TO  REDUCE  THIS  POSSIBILITY,
GIVE COMPLETE AND UNDIVIDED ATTENTION TO
THE JOB AT HAND AND FOLLOW THESE SAFETY
PRECAUTIONS.

PREPARATION

1)  This  Blower  is  a  specialized  type  of  powered
equipment,  designed  for  a  specific  job  function  and
requires adequate and thorough instruction BEFORE it

is  operated.  Each  operator  must  receive  adequate,
professional instruction regarding the proper operation
of  this  Blower  BEFORE  being  allowed  to  operate  it.
Refer  to  OSHA  2207  (and/or  applicable  updated
revision) which contains all OSHA job safety and health
rules  and  regulations  (1926  and  1910)  covering
construction. BEFORE attempting to utilize this Blower,
read  this  Operator's  Manual  and  view  the  safety  and
operational  information  video  tape  supplied  by  the
manufacturer  to  familiarize  each  operator  with  its
correct  operating  procedures.  When  you  are  going  to
utilize this Blower-DO IT RIGHT-avoid the urge not to
take the time to read this Operator's Manual BEFORE
utilizing  the  Blower.  DO  NOT  OPERATE  THIS
BLOWER  UNTIL  EACH  OPERATOR  COMPLETELY
COMPREHENDS  THE  CONTENTS  OF  THIS
MANUAL  AND  HAS  VIEWED  THE  SAFETY  AND
OPERATIONAL INFORMATION VIDEO TAPE.

2)  Develop  a  comprehensive  program  for  the  safe
operation  of  the  Blower  by  its  owner(s)  and/or
operator(s).  Such  a  program  will  include,  but  is  not
limited  to:  instructional  requirements  for  operation,
applicable  OSHA  requirements,  local  laws  and
regulations, job site safety and a Blower maintenance
program.  Constantly  examine  and  upgrade  this
program  to  guarantee  owner(s)  and/or  operators(s)
safety.  Each  operator  must  be  fully  instructed
regarding the specifics of this safety program. Refer to
(29 CFR 1926.21 (b) (2)) and/or current revision.

3)  Determine  that  the  Blower  is  in  its  original,  factory
configuration  and  has  not  been  modified  in  any
manner.  Many  modifications  can  result  in  potentially
dangerous  configurations  that  can  lead  to  property
damage  and/or  personal  injury.  If  there  are  any
questions  about  possible  modifications  made  to  the
Blower, contact the Customer Service Department for
specific  information  BEFORE  utilization.  There  is  no
charge for this service.

4)  Minors  should  never  be  allowed  to  operate  the
Blower.  Bystanders,  especially  children  and  animals
should not be allowed in the area where a Blower is in
use.

5)  Operators  must  be  in  adequate  physical  condition,
mental  health  and  not  under  the  influence  of  any
substance  (drugs,  alcohol,  etc.)  which  might  impair
vision, dexterity or judgement. Working with the Blower
can be strenuous. If you have any condition that might
be  aggravated  by  strenuous  work,  check  with  your

EP8HL HAZARDOUS BLOWER
FORM GOM7069501, VERSION 1.2

6

Содержание EP8HL






















































Отзывы: