Generac Power Systems PV Link 010023, Руководство по установке

Страница: 5 / 32

Installation Manual for PV Link and SnapRS 1
Section 1 Introduction and Safety
Introduction
Thank you for purchasing a Generac PWR -
cell
®
product.
This manual provides instructions for installing
PV Link and SnapsRS devices. Consult the
installation and operation manuals for other
Generac PWRcell system components, as
applicable.
The information in this manual is accurate
based on products produced at the time of
publication. The manufacturer reserves the
right to make technical updates, corrections,
and product revisions at any time without
notice.
If any section of this manual is not understood,
contact the nearest Independent Authorized
Service Dealer (IASD) or Generac Customer
Service at 1-888-436-3722 (1-888-GEN -
ERAC), or visit
www.generac.com
for assis -
tance. The owner is responsible for correct
maintenance and safe use of the unit.
This manual must be used in conjunction with
all other supporting product documentation
supplied with the product.
SAVE THESE INSTRUCTIONS for future ref -
erence. This manual contains important
instructions that must be followed during
placement, operation, and maintenance of the
unit and its components. Always supply this
manual to any individual that will use this unit,
and instruct them on how to correctly start,
operate, and stop the unit in case of emer -
gency.
Safety Rules
The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The alerts in this manual, and on tags
and decals affixed to the unit, are not all inclu -
sive. If using a procedure, work method, or
operating technique that the manufacturer
does not specifically recommend, verify that it
is safe for others and does not render the
equipment unsafe.
Throughout this publication, and on tags and
decals affixed to the unit, DANGER, WARN -
ING, CAUTION, and NOTE blocks are used to
alert personnel to special instructions about a
particular operation that may be hazardous if
performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
NOTE: Notes contain additional information
important to a procedure and will be found
within the regular text of this manual.
These safety alerts cannot eliminate the haz
-
ards that they indicate. Common sense and
strict compliance with the special instructions
while performing the action or service are
essential to preventing accidents.
How to Obtain Service
For assistance, contact the nearest Indepen -
dent Authorized Service Dealer (IASD) or
Generac Customer Service at 1-888-GEN -
ERAC (1-888-436-3722), or visit
www.generac.com .
When contacting Generac Customer Service,
always supply the complete model and serial
number of the unit as given on its data decal
located on the unit. Record the model and
serial numbers in the spaces provided on the
front cover of this manual.
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.