Generac Power Systems MC10000, Руководство пользователя

Страница: 8 / 20

Generac Portable Products MC10000 Extended Life Generator
8
RECEPTACLES
This generator is equipped with the following
receptacles:
120 Volt AC, 20 Amp GFCI
Receptacle
This receptacle (Figure 4) is protected against
overload by a 20 Amp, push-to-reset, circuit breaker.
Use each receptacle to operate 120 Volt AC, single-
phase, 60 Hz electrical loads requiring up to 2400
watts (2.4 kW) at 20 Amps of current. Use cord sets
that are rated for 125 Volts at 20 Amps (or greater).
120 Volt AC, 20 Amp Locking
Receptacle
Use a NEMA L5–20 plug with this receptacle. Connect
a 3–wire cord set rated for 125 Volts AC at 20 Amps to
the plug (Figure 5).
Use this receptacle to operate 120 Volt AC, 60 Hz,
single phase loads requiring up to 2400 watts (2.4 kW)
of power at 20 AC Amps. The outlet is protected by a
20 Amp push–to–reset circuit breaker.
Figure 4 — 120 Volt, 20 Amp GFCI Receptacle
Figure 5 — 120 Volt, 20 Amp, Locking Receptacle