Generac Power Systems MAGNUM MMG100D Скачать руководство пользователя страница 16

Страница: 16 / 48

Owner’s Manual for Generator

General Information

Figure 2-13. Alarms Tab Screen (Page Two)

To scroll down within the event log, press the Enter (



)

button. The scroll bar will change to blue, signifying it is
active. Press the

▲



buttons to scroll up or down in

the event log. When finished, press the Enter (



) button

again.

Input/Output Tab

The Input/Output (I/O) tab shows a list of digital inputs
and outputs connected to the controller, whether they are
active and the current state (open/closed status) of the
input and output.

Figure 2-14. Input/Output Tab Screen

Schedule Tab

The Scheduler tab shows the current configuration and
status of the scheduler, located below the generator
summary. The maintenance configuration status and time
remaining until an alarm, electrical trip or shutdown will
be displayed at the bottom of the screen. The lamp(s) to
the left shows the configuration status of the
maintenance alarm, not the alarm condition.

Figure 2-15. Schedule Tab Screen

Status Tab

The Status tab contains the status and configuration of
the controller, firmware and data connections.

Figure 2-16. Status Tab Screen

Generator Monitoring

Generator information is displayed on both the Generator
button screen and Generator tab within the maintenance
screens. For more information, refer to

Generator

Button

and

Generator Tab

Engine Monitoring

Engine information is displayed on both the Engine
operator screen and Engine tab within the maintenance
screens. For more information, refer to

Engine Button

and

Engine Tab

Diesel Exhaust Filter Monitoring

This unit is equipped with a Diesel Particulate Filter (DPF)
to meet current EPA emissions standards. This section
gives an explanation of the indicators that are displayed
on the DPF Status page of the Engine tab.

To access the DPF Status page, press any direction arrow
(

▲

►

▼

◄

) to enter the maintenance screens, and then

while on the Engine tab, press the

▼

button to toggle

through the pages until the DPF Status page appears.
There are four areas on the DPF Status page that
communicate various information to the operator. The

GEN

SITE

GENSET

7741 \ 7740

07:10

480V/277V 3-Phase

Return Delay

10:00:00

0.0

Total

Generator

kWh+

kVAh

kVArh

kVA

kVAr

0.0

0.0
0.0
0.0

0.00

0.0

%
%

0.0

kVAr

Status

Schedule

I/O

Alarms

Engine

Generator

2/2

Warning

Shutdown
Shutdown

Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown

This is an event index 1
This is an event index 2
This is an event index 3
This is an event index 4
This is an event index 5
This is an event index 6
This is an event index 7
This is an event index 8
This is an event index 9
This is an event index 10
This is an event index 11
This is an event index 12
This is an event index 13

1 01/01/1970 00:00:01 0:00
2 02/06/1970 11:45:55 0:00
3 01/01/1970 00:00:00 0:00
4 01/01/1970 00:00:00 0:00
5 01/01/1970 00:00:00 0:00
6 01/01/1970 00:00:00 0:00
7 01/01/1970 00:00:00 0:00
8 01/01/1970 00:00:00 0:00
9 01/01/1970 00:00:00 0:00
10 01/01/1970 00:00:00 0:00
11
12 01/01/1970 00:00:00 0:00
13 01/01/1970 00:00:00 0:00

01/01/1970 00:00:00 0:00

Index Date Time Hrs Event Details

002794

GEN