Generac Power Systems MAGNUM MGG200, Руководство пользователя

Страница: 71 / 88

38108 ORG MGG200/200G Parts Manual 65
ENGINE ASSEMBLY - LEFT SIDE
Item Part No. Qty Description Notes
1 39510 1 Pipe, oil fill Reuse hardware
2 34907 1 Cap, oil
3 53331 2 Fitting, 90° - .375NPT x .625 barb
4 34905 4 Clamp, hose .875 double wire
5 35380 6.83 ft Hose, .625 ID, SAE 20R3
6 35380 2.1 ft Hose, .625 ID, SAE 20R3
7 37341 2 Screw, M6-1.0 x 20 hex cap, G8.8
8 34626 1 Heater, coolant - 240V
9 37388 2 Washer, M6-.250 flat
10 53337 2 Washer, M6-.250 split lock
11 39419 2 Nut, M6-1 hex, G8
12 53477 1 Bracket, coolant heater
13 50206 1 ft Hose, fuel - .500 ID, 35 psi, SAE 30R7
14 19453 4 Clamp, hose - SAE 006 (.37-.87)
15 34841 1 Fitting, 45° - .375MNPT x .500 barb, brass
16 34866 1 Assembly, oil level controller
17 60386 14 Washer, .375 flat .933/.064
18 60139 7 Screw, .375-16 x 1.50 std hex, G5
19 60437 1 Fitting, strt - .500NPT x .750 barb
20 19338 2 Clamp, hose - SAE016 (.68-1.50)
21 50332 1.08 ft Hose, fuel .750 ID, 35 psi, SAE 30R7
22 27673 1 Fitting, 90° - .750MNPT x .750 barb, brass
23 34556B 1 Bracket, oil controller mount
24 60358 7 Nut, .375-16 nylock, G5
25 61223 2 Fitting, 90° - .500MNPT x .500 barb, brass
26 50206 7.66 ft Hose, fuel .500 ID, 35 psi, SAE 30R7
27 40728 1 Fitting, strt - .500MNPT x .500 barb
28 31830B 1 Weldment, vent, oil recovery Reuse hardware
29 34969 1 Dipstick, oil
30 39514 2 Mount, engine Reuse hardware
31 34948 1 Separator, oil
32 34619 1 Belt, fan
-- 34769 1 O-ring, 18MM ID, 2.5MM wide Replace on dipstick
-- 31780 1 Harness, engine