Generac Power Systems MAGNUM MGG200, Руководство пользователя

Страница: 10 / 88

4 MGG200/200G Parts Manual 38108 ORG
UNIT DECALS - EXTERIOR
Fuel Inlet
Natural gas • Well gas
Max. pressure: 20.0 PSI
Min. pressure: 10.0 PSI
ENGINE OIL DRAIN COOLANT DRAIN
DANGER
GEFAHR
PELIGRO
DANGER
Combustible Gas
WARNING
WARNUNG
ADVERTENCIA
ADVERTISSEMENT
Fuel/Water Separator Drain
WARNUNG
ADVERTENCIA
AVERTISSEMENT
WARNING
01916
Located inside door
MAINTENANCE CHECKS
After the engine has stopped for at least 10 minutes,
the oil level should be at or near the top of the sight glass.
Ensure the engine oil reservoir valve is open to allow oil to flow to the
oil make-up controller. See manual for more information.
Critical Daily Checks
Verify trailer is as level as possible with tires blocked and jacks extended.
Check tire pressure.
Verify radiator and exhaust areas are clear of debris.
While the unit is running, the level in the sight glass will
fall just below half-way on the sight glass.
Engine Oil Level
General
ITEM
Daily
SERVICE INTERVAL (HOURS)
First
50
Hours
Every
750
Hours
8000
Hours
(Annually)
BASIC MAINTENANCE SCHEDULE
Walk Around Inspection
Check Oil Level
Check Coolant Level
Check Tire Pressure
Check Belts
Check Electrical Wiring
Inspect Radiator for Signs of Obstruction or Damage
Inspect Gas Piping and Hoses for Leaks and Damage
Sample Engine Oil
Change Oil, Replace Oil Filters
Inspect/Replace Crankcase Ventilation Filters
Check All Flex Hoses
Check and Adjust Intake and Exhaust Valve Clearance
Service Battery
Inspect Battery Connections and Disconnect Switch
Lubricate Trailer Leveling Jacks
Check Engine and Generator Mounts
Drain, Flush and Refill Cooling System
Inspect Coolant Hoses
Replace Spark Plugs
Replace Ignition Coils
Visually Inspect Air Filter (replace if necessary)
Inspect Shutoff Valve for Leaks and Closing
Check Engine Air Induction for Leaks
Drain LPL Vaporizer Oil Build Up
Inspect Exhaust/Catalyst
⌧ Break-in period, one time.
Engine Stopped
Engine Running
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
Located inside door
1 1
1
1
1
1 1
1
3
3
MAINTENANCE CHECKS
After the engine has stopped for at least 10 minutes,
the oil level should be at or near the top of the sight glass.
Ensure the engine oil reservoir valve is open to allow oil to flow to the
oil make-up controller. See manual for more information.
Critical Daily Checks
Verify trailer is as level as possible with tires blocked and jacks extended.
Check tire pressure.
Verify radiator and exhaust areas are clear of debris.
While the unit is running, the level in the sight glass will
fall just below half-way on the sight glass.
Engine Oil Level
General
ITEM
Daily
SERVICE INTERVAL (HOURS)
First
50
Hours
Every
750
Hours
8000
Hours
(Annually)
BASIC MAINTENANCE SCHEDULE
Walk Around Inspection
Check Oil Level
Check Coolant Level
Check Tire Pressure
Check Belts
Check Electrical Wiring
Inspect Radiator for Signs of Obstruction or Damage
Inspect Gas Piping and Hoses for Leaks and Damage
Sample Engine Oil
Change Oil, Replace Oil Filters
Inspect/Replace Crankcase Ventilation Filters
Check All Flex Hoses
Check and Adjust Intake and Exhaust Valve Clearance
Service Battery
Inspect Battery Connections and Disconnect Switch
Lubricate Trailer Leveling Jacks
Check Engine and Generator Mounts
Drain, Flush and Refill Cooling System
Inspect Coolant Hoses
Replace Spark Plugs
Replace Ignition Coils
Visually Inspect Air Filter (replace if necessary)
Inspect Shutoff Valve for Leaks and Closing
Check Engine Air Induction for Leaks
Drain LPL Vaporizer Oil Build Up
Inspect Exhaust/Catalyst
⌧
Break-in period, one time.
Engine Stopped
Engine Running
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
⌧
4
4
2