Generac Power Systems MAC 950F, Руководство пользователя

Страница: 15 / 36

Owner’s Manual for Flameless Air Heater 11
Operation
Adjusting Heater Output
The heater has two modes, AUTO and MANUAL. The
current mode displays at the top of the controller screen.
AUTO Mode
In AUTO mode, output temperature is manually set, as
follows:
• To increase output temperature, press (+) ( Figure
3-6 , item A)
• To decrease output temperature, press (-) ( Figure
3-6 , item B)
Figure 3-6. AUTO mode
MANUAL Mode
In MANUAL mode, heater output can be set to minimum
fan or maximum fan, as follows:
• For minimum fan, press MIN FAN ( Figure 3-7 , item
A). Minimum fan produces the highest temperature
at the lowest air flow.
• For maximum fan, press MAX FAN ( Figure 3-7 ,
item B). Maximum fan produces a lower
temperature at a higher air flow.
Figure 3-7. MANUAL mode
Heater and Engine Shutdown
1.
Press OFF to stop the heater ( Figure 3-7 , item C).
Heater automatically turns off and the engine
begins cooling down (
Figure 3-8 ).
Figure 3-8. Heater Cooling
NOTE: During cool down, the ON button is disabled.
When cool down is complete, the screen displays as
shown in
Figure 3-9 .
Figure 3-9. Cool-down Complete
2.
When the control screen indicates it is safe to turn
off the engine, turn the ignition key to OFF.
A
B
A
B
C
&$87,21
(TXLSPHQW'DPDJH7KHHPHUJHQF\VWRSVZLWFK
LVQRWWREHXVHGWRSRZHUGRZQWKHXQLWXQGHU
QRUPDORSHUDWLQJFLUFXPVWDQFHV'RLQJVRZLOO
UHVXOWLQHTXLSPHQWGDPDJH
&$87,21
D
8QLWGDPDJH'RQRWVWRSHQJLQHEHIRUHKHDWLQJ
XQLWLVFRROHG'RLQJVRFRXOGUHVXOWLQXQLWGDPDJH