Generac Portable Products 2,400 PSI High Pressure Washer
4
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Adjustable Nozzle — Always attached to nozzle extension.
Adjustable nozzle allows you to adjust force of spray and spray
pattern.
Air Cleaner — Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water through
pump when water reaches 140°-145°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Engine Choke Control — Permits easier engine starting.
Fuel Cap — Fill with clean unleaded fuel here.
High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
High Pressure Outlet — Connection for pressure hose.
Nozzle Extension — Attach to spray gun to use adjustable
nozzle.
Oil Fill Cap/Dipstick — Used for checking and adding oil.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Safety Goggles — Always wear eye protection when
operating pressure washer.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connection for garden hose.
High Pressure Hose
Safety Goggles
Adjustable Nozzle
Engine Choke
Control and
Throttle Lever
High Pressure Outlet
Pump equipped with Automatic
Cool Down System
Spray Gun
Fuel Cap
Water Inlet
Oil Fill
Cap/Dipstick
Recoil Starter
Nozzle Extension
Air Cleaner
