Generac Portable Products 1294-0, Руководство пользователя

Страница: 5 / 20

Generac Portable Products 2200 PSI High Pressure Washer
5
Chemical Nozzle
High Pressure Nozzles
Nozzle Extension with
Quick Connect Fitting
Choke Rod
High Pressure Outlet
Pump equipped with
Automatic Cool Down
System
Spray Gun
Water Inlet
Oil Fill Cap
Pressure Control Knob
Fuel Tank
Recoil Starter
Throttle Lever
Air Cleaner
Chemical Injection Tube
KNOW YOUR PRESSURE WASHER
Read this owner’s manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the location of the controls.
Save this manual for future reference.
Air Cleaner — Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water through
pump when water reaches 140°-145°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical Injection Tube —Used to siphon chemical from
the detergent container to the pump.
Chemical Nozzle — Use this nozzle to apply chemical.
Choke Rod — Prepares a cold engine for starting.
Fuel Tank — Fill engine with regular unleaded gasoline
here.
Goggles (not shown) — Always use the goggles or other
eye protection when running your pressure washer.
High Pressure Hose (not shown)— Connect one end to
water pump and the other end to spray gun. Store hose on
hook on the rear of the unit
High Pressure Nozzles — Use these nozzles to clean and
scour a surface. These nozzles vary the spray pattern of the
high pressure stream and cannot be used to apply chemical.
High Pressure Outlet — Connection for high pressure hose.
Nozzle Extension with Quick–Connect Fitting — You must
attach this to the spray gun to use the nozzles. The
quick–connect fitting lets you quickly exchange the four
provided nozzles to adjust the spray pattern of the high
pressure spray and apply chemical.
Oil Fill Cap —Fill engine with oil here. See page 7 for oil
requirements.
Pressure Control Knob — Varies the pressure of the high
pressure spray.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger. Includes safety latch.
Throttle Lever —Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connection for garden hose
.