GeneMate GM Series Balances, Руководство по эксплуатации

Страница: 4 / 17

INSTALLATION & SETUP
-
Choose a location that is free from the influences of the following:
-
Drafts: Fans, Heat/Air Duct, Doorways or High Traffic Areas.
-
Vibrations.
-
Extreme Temperature Fluctuations: Sunlight, Ovens, or Environments with Wide Temperature Variations.
-
Voltage Fluctuations. Do Not Share Current with Other Instruments that Draw Voltage in an Inconsistent
Manner such as Fluorescent Lights, Centrifuges and the like.
- Place Instrument on a Level, Rigid Surface.
- Level the Instrument.
- Allow 60 Minutes for Warm-up.
- Calibrate. All GM-Series are calibrated at the factory prior to shipment. Transportation of the instrument plus
the differences in barometric pressure, humidity and ambient temperature conditions require calibration at the
point of use. Calibrate regularly, at least once a week, to ensure accurate weighing results.
Place components inside the chamber in the following order
(Models B-1850-20, -60, -120, -210, -200, -400, -500 &-1000)
-
Dust Guard
-
Draft Ring
-
Pan Support
-
Weighing Pan
Place weigh pan on balance ( Models B-1850-4000 & B-1850-5000)
Page 2