background image

 

SERVICE AND TECHNICAL SUPPORT 

If you have ANY questions or require technical, application or service support please contact BioExpress at 
800-999-2901. 

Please note that BioExpress and affiliates cannot take back any instrument that has been exposed to biological or 
hazardous material contamination for replacement, credit, repair or disposal.   

 
DISPOSAL

   

 

 

 

Please consider the environment when disposing of your instrument and the packing material. Please recycle all 
environmentally friendly waste. Please contact your local government agency, facilities manager or a commercial 
disposal operator on the proper disposal of the instrument and power supply. 

 

CE Compliance & Marking

 

 

 
 
 

This instrument complies with European Standards and EC Directives: 

 

Electromagnetic Compatibility (EMC) Council Directive 89/336/EEC 

Applicable European Standards: 

Limitation of Emissions in accordance with standard EN 61326-1 Class B for residential areas. 

 

72/23/EEC “Electrical Equipment Design within Certain Voltage Limits”   

Applicable European Standards: 

EN 60950 

Safety Requirements for electrical equipment for measurement, control and laboratory use Part1: General 
requirements. 

 

Note: 

Modification of this instrument in any manner is the sole responsibility of the owner/operator. In addition to voiding 
the warranty, the owner/operator is responsible to check and if necessary correct any modifications required in 
accordance to the standards listed above for immunity to interference.    Operating standards for this instrument 
are available upon request. 

 

 
 
 
 

Page 12 

Содержание GM Series Balances


















Отзывы: