Smart IP Manager - System Operating Manual
page 26 of 48
Zones are indicated by a bold title showing the name of the zone. The loudspeakers belonging into
a zone are shown under this title. The list of loudspeakers can be collapsed.
Zone contains shared controls. These are shown after the zone name. These items contain
MUTE button to mute or play the zone
controls for volume (+ and – signs)
setup profile selector – the setup is collectively set for all loudspeakers in the zone
Figure 1. The zone name line, also showing the zone control functions
5.4 Loudspeaker management
Each loudspeaker is presented under the zone title, and the data shown for each loudspeaker is
name of the receiver device (user settable using the Dante Controller)
IP address assigned to the loudspeaker (typically provided by an automatic selection
system, run by DHCP protocol) – this IP number is used for the loudspeaker control
audio input (values are Mix, AoIP, Analog, No input)
a status text showing any errors and warnings (this can be cleared from the File menu,
option ‘Clear all messages’)
Figure 2. The loudspeaker information shown under the zone title; this example shows two
loudspeakers called ‘Genelec-8222cd’ and ‘Genelec-8222e8’
The exclamation mark (
!
)
in the front of a loudspeaker icon means that the loudspeaker has
something to report. The detailed messages can be seen in the ‘events’ tab. A loudspeakers power
status can be STANDBY or ACTIVE, the connection status can be Online or Offline. If the
loudspeaker has some problems, its internal status is ‘warning’ or in severe cases, ‘error’.
Firmware update status is also shown in the same manner.
Figure 23. Loudspeaker status indicators ('!' and ’warning’ text).
