Smart IP Manager - System Operating Manual
page 17 of 48
5 Using Smart IP Manager
When starting Smart IP Manager for the first time the network interface which is used for
controlling the Smart IP loudspeakers need to be defined. For example, most computers offer a
cable-based IP network and WLAN interfaces.
IP addresses can be set following ways:
DHCP (recommended)
Manual IP address
AutoIP (not recommended – used automatically if nothing else not available 169.254.x.x)
IP address mask
Select the network in the menu item ‘Settings’ | ‘Audio network’. The IP network is selected by
giving the IP network address of the computer IP network interface you want to use. Please use
the ‘ipconfig’ command to get a list of all IP networks in their IP addresses in the computer. Enter
the IP address of the interface you want to use.
Figure 10. Audio network settings window.
To start using the Smart IP manager with a certain loudspeaker you need the System username
and System password. When the loudspeaker leaves the factory, the loudspeaker has been
assigned default credentials that are System username ‘admin’ and System password ‘admin’.
Always change these when you access the loudspeaker the first time (see Zone Credentials
chapter).
