Geneko GWG, Руководство пользователя

Страница: 94 / 158

94
User Manual
GWG Gateway
Management – Logs
Syslog is a standard for forwarding log messages in an IP network. The term "syslog" is often used
for both the actual syslog protocol, as well as the application or library sending syslog messages.
Syslog is a client/server protocol: the syslog sender sends a small (less than 1KB) textual message to
the syslog receiver. Syslog is typically used for computer system management and security auditing. While
it has a number of shortcomings, syslog is supported by a wide variety of devices and receivers across
multiple platforms. Because of this, syslog can be used to integrate log data from many different types of
systems into a central repository.
Figure
70
– Syslog configuration page
The GWR Router supports this protocol and can send its activity logs to an external server.
Syslog Settings
Label Description
Disable Mark this option in order to disable Syslog feature.
Local syslog
Mark this option in order to enable Local syslog feature. Logs will remain on the
router.
local syslog Mark this option in order to enable remote and local syslog feature.
Log to
Log to
Set syslog storage to the router's internal buffer (local) or external to the USB
flash. If you choose USB flash, drive must be formatted using the FAT32 file
system.
Syslog file size
Set log size on one of the six predefined values. [10 / 20 / 50 / 128 / 256 / 512 /
1024]KB
Event log
Choose which events to be stored. You can store System, IPsec events or both of
them.
Enable syslog saver Save logs periodically on filesystem.