Geneko GWG, Руководство пользователя

Страница: 81 / 158

81
User Manual
GWG Gateway
On router’s board are 5 GPIO generic pins which represent:
1. +5VDC with 500mA resettable PTC fuse
2. IO1
3. IO2
4. IO3
5. GND
IO1, IO2, IO3 are 3 user selectable input or output.
Input value is readable (high=1, low=0).
Output value is writable (high=1, low=0).
Maintenance – Device Identity Settings
Within Device Identity Settings Tab there is an option to define name, location of device and
description of device function. These data are kept in device permanent memory. Device Identity Settings
window is shown on
Figure 48
.
Device Identity Settings
Label Description
Name This field specifies name of the GWG Gateway.
Description This field specifies description of the GWG Gateway. Only for information purpose.
Location
This field specifies location of the GWG Gateway. Only for information purpose.
Save Click Save button to save your changes back to the GWR Router.
Reload Click Reload to discard any changes and reload previous settings.
Table
28
– Device Identity Parameters
Figure
53
– Device Identity Settings configuration page
Maintenance – Authentication
By Administrator Password Tab it is possible to activate and deactivate device access system
through Username and Password mechanism. Within this menu change of authorization data
Username/Password is also done. Administrator Password Tab window is shown on
Figure 49
.
NOTE: The password cannot be recovered if it is lost or forgotten. If the password is lost or
forgotten, you have to reset the Gateway to its factory default settings; this will remove all of your
configuration changes.