Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[email protected] - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 19/01/2021 NUMERO DE REVISIÓN: 2
8
8. Preliminary Test and Settings
•
It is recommended that only qualified electrical engineers be allowed to connect or
adjust these actuators. Always ensure that the power supply is disconnected prior
to removing the top cover by disconnecting the DIN power input plug.
•
It is strongly recommended that each actuator has its own independent fuse
system to protect it from the electrical influence of other electrical devices.
8.1 Local Visual Position Indicator
•
All GE actuators are supplied with a local visual position indicador comprising of a
black base with a yellow insert that shows both the position and direction of
rotation (Figure 1).
•
When the yellow insert indicate
]
[
the actuator is OPEN and if this indication
is
] [
the actuator is CLOSED.
Figura 1
•
Opening = counter clockwise.
Closing = Clockwise
8.2 Emergency Manual Override Facility
•
All GE actuators are supplied with a declutchable manual override to allow
operation should power not be available.
•
The GE actuator has 2 operating modes, automatic and manual, the required
mode is selected using a lever on the lower half of the actuator housing. The 2
positions are marked:
AUTO = Automatic operation
MAN = Manual operation
Local visual
position indicator
