Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[email protected] - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 19/01/2021 NUMERO DE REVISIÓN: 2
11
Cams position:
1 = Cam1 adjusting of the closed position.
2 = Cam 2 adjusting of the open position.
3 = Cam 3 adjusting of the closed position confirmation.
4 = Cam 2 adjusting of the open position confirmation.
To avoid the problem that the position confirmation does not work, adjust the confirmation
cams (3 & 4) aprox. 3 degrees before of the stop motor.
To adjust the close position at less than 0º:
Turn the wrench to clockwise direction
– cams 1 and 3.
The cam 3 should press the lever of the micro switch a little before that the cam 1.
To adjust the close position at more than 0º:
Turn the wrench to anti-clockwise direction
– cams 1 and 3.
The cam 3 should press the lever of the micro switch a little before that the cam 1.
