Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[email protected] - www.genebre.es
GENEBRE S.A.
FECHA DE REVISIÓN: 07/05/2019 NUMERO DE REVISIÓN: 2
3. Transport and Storage
•
All
products are packed in sturdy packing. During transport measures should
be adopted in order to prevent impacts, hits.
•
Storage must be off the floor, covered with a sealed dust protector.
•
While commissioning, Genebre, S.A. recommend a visual inspection in order to
detect any anomaly caused during the transport, handling or during the
storage.
4. Pre-Installation Inspection
•
Verify the product nameplate to insure correct model number, before installation or
use.
•
If there is any discrepancy, please contact with our local distributor, or Genebre,
S.A., to solve that discrepancy.
5. External Electrical Connections
Safety instructions on chapter 2 must be observed. Work on electrical system
or equipment must only be carried out by skilled electrician.
Under no circumstances should any modification or alteration be carried out
on the actuator as this could very well invalidate the conditions which the
device was designed.
As electric device, during electrical operation certain parts inevitably carry
lethal voltages and currents (ELECTRICAL RISKS).
