LR900 Node
Hardware Installation and User Guide
9000-0000-126 Revision 01
6 of 21
Genave Electronics
Specifications
General Specifications
Enclosure
Radio Transceiver Module
Width:
36mm (1.417 inches)
ISM:
902-928MHz
Length:
100mm (3.937 inches)
Max Power:
250mW
Height:
80mm (3.149 inches)
Weight:
114.6 grams (5.10oz)
Battery
General:
LiFePO4
Input Connector
3.2V
Header:
9 pos., 2.5mm
400mAH
Mating Connector:
9 pos. cage clamp
UN38.8 Passed
28-16 AWG
<20Wh Single Cell
0.25” Strip length
Shippable under:
UN3481 PI967 Section 2
P/N 6000-0101-124
Max Input Voltage:
30V
DC
(Pull to GND for active)
Display
Type:
OLED
Output Connector
Size:
128 x 64
Header:
9 pos., 3.5mm
Colors:
Blue & Yellow
Mating Connector:
9 pos. screw clamp
26-16 AWG
MicroSD Card Slot
0.25” Strip length
Accepts:
Transflash MicroSD
P/N 6000-0049-009
SDHC, Class 10, FAT32,
Max Control Voltage:
30 V
DC
4GB to 32GB
Max Control Current:
70mA
Transmit / Receive Distance*
Power Connector
Included Antennas:
Up to 1000’ Indoor/Urban
Header:
2 pos., 3.81mm
Up to 2 Miles Outdoor*
Mating Connector:
2 pos. screw clamp
Optional Antennas:
Up to 2000’ Indoor/Urban
26-16 AWG
Up to 6 Miles Outdoor*
0.25” Strip length
*Line of Sight (LOS)
P/N 6000-0048-003
unobstructed
Input Voltage:
7.5 to 28 V
DC
Antenna Connector (if equipped)
Connector:
50 Ohm
Reverse Polarity SMA
(RPSMA)
External Antenna (if equipped)
Antenna:
Dipole
Reverse Polarity SMA
(RPSMA)
½ Wave
50 Ohm
3dBi Gain
P/N 8035-0000-008
Internal Antenna (if equipped)
Antenna:
Whip
u.fl
¼ Wave
50 Ohm
*The range of all radio products is not guaranteed and is dependent on local and environmental conditions, structures,
antenna selection and location.
Additional LR900 modules may be used as repeaters to enhance coverage and extend range.
