LR900 Node
Hardware Installation and User Guide
9000-0000-126 Revision 01
17 of 21
Genave Electronics
Returning to Factory Defaults Using Buttons
Another method to restore the default settings is to use the arrow buttons. Press and hold the
BACK
button and the
UP
button at the same time while applying power to the unit. Release
the buttons once the unit indicates that it’s working on restoring the defaults.
Adding More Units to a System / Cloning Units
In most instances, the LR900
’s will operate as required using the factory defaults with a new
encryption code as the only recommended change. Adding another Node to the system is as
simple
as matching the unit’s
System ID, RF Channel, Encryption Key
to the existing
system nodes and assigning the new Node a unique
Unit ID
.
In applications where many changes have been made to the LR900
’s operation, it’s easy to
clone a new LR900 by using a Transflash memory card to transfer the configuration from the
operating unit to the fresh LR900.
Insert a fresh SD memory card into the operating unit
(source unit).
Menu View/Edit Settings->Clone to SD.
Remove SD card after the configuration has finished and
plug into the fresh LR900 (destination unit).
Menu View/Edit Settings->Load New Pgm.
Restart the destination unit and manually change the
Encryption Key and give it a unique ID number.
Press and hold
simultaneously as
power is applied.
