background image

LR900 Node

 

Hardware Installation and User Guide

 

 

9000-0000-126 Revision 01

 

3 of 21 

Genave Electronics

 

©2018, Genave/NRC, Inc.

 

LR900 Node

 Hardware

 

Phone 952-236-6540 

 
 

PRINTED IN USA

 

The contents of this manual are the property of Genave/NRC, Inc. and are copyrighted. Any reproduction in whole or in part is strictly 
prohibited. For additional copies of this manual or software, please contact Genave/NRC, Inc.

 

 
Warranty: 
Genave/NRC, Inc. products are warranted to be free from defects in material and workmanship for a 
period of ONE (1) year from the date of shipment. Genave, during this period, will repair or replace any 
parts, which upon our examination appear to be defective in materials or workmanship. This warranty 
does not apply to defects, malfunctions or breakage due to improper installation, servicing, handling or 
use thereof, nor to units that have been damaged by lightening or other “Acts of God”, excess current, 
reversed supply connection, nor to units that have had their serial numbers altered or removed. 
Equipment damaged in Acts of War, abuse, misuse, tampering, submersion or willful destruction will 
also void this warranty. 
Prior to returning equipment for warranty repair, contact the Genave Customer Service Department for 
an RMA number. They can be reached by using the telephone number or fax number listed above.  
Genave/NRC, Inc. (Genave) and its licensers offer this warranty in lieu of any and all other guarantees or 
warranties, either express or implied, including without limitation the implied warranties of 
merchantability and fitness for a particular purpose, regarding hardware or software. Genave and its 
licensors do not warrant, guarantee or make any representations regarding the use or the results of the 
use of the software or hardware in terms of its correctness, accuracy, reliability, most recent or 
otherwise. You assume the entire risk as to the results and performance. The exclusion of implied 
warranties is not permitted by some jurisdictions. The above exclusion may not apply to you.

 

 
In no event will Genave, its licensors, directors, officers, employees or agents (collectively Genave’s licensor) be liable to you for 
any consequential, incidental or indirect damages (including damages for loss of business profits, business interruption, loss of 
business information, and the like) arising out of the use or inability to use the software or hardware even if the Genave and/or its 
licensor has been advised of the possibility of such damages. Because some jurisdictions do not allow the exclusion or limitation 
of liability for consequential or incidental damages, the above limitations may not apply to you. Genave and its licensors liability to 
you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort, (including 
negligence), product liability or otherwise), are expressly excluded. 
 
Genave reserves the right to make changes in specifications at any time and without notice. The information furnished by Genave 
is believed to be accurate and reliable, however, no responsibility is assumed by Genave for its use, nor infringements of patents 
or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Genave/NRC, Inc., 
its licensors or suppliers. 
 
Life Support Policy: 
Genave/NRC, Inc. products are not authorized for use as critical components in life support devices or systems without the 
express written approval of the president of Genave/NRC, Inc. As used herein: 
 
1) Life support devices or systems are devices or systems which, (a) are intended for surgical implants into the body, or (b) 
support or sustain life, or whose failure to perform, when properly used in accordance with instructions, can reasonably be 
expected to result in a significant injury to the user.

 

 

2) Critical component is any component of a life support device or system whose failure to perform can be reasonably expected to 
cause the failure of the life support device or system, or to affect its safety or effectiveness. 

 

CSP, Communications Signal Processor, Genave Operating System, GOS, CSP-105, RXC-3000, LR900, LR-900 and RXCPro are 

Trademarks of Genave/NRC, Inc. The Genave name and logo are Registered trademarks of Genave/NRC, Inc.  

Other names used in this manual are trademarks of their respective companies.

 

 
 

 

 

Содержание LR900 Node






















Отзывы: