genata Super power, Руководство по обслуживанию

Страница: 27 / 51

www.genatamotor.eu 27

BATTEREY INSPECTION
The battery for this motorcycle is enclosed Li-
NiCoMn lithium battery, and need to use the
digital multi-meter to measure the positive and
negative voltage, after the battery is fully
charged. The voltage for the fully charged
battery should be within the range 53.5-54.6V. If
out of the range, then, need to send the
motorcycle to the local dealer
’s maintenance
station to check.

FUSE REPLACEMENT
After the air switch and electricity switch were
turned on, if all the lights and the horn do not
work, may be because the fuse was blown.
Before the users replace the fuse, please turn off
the air and electricity switches.
1. Open the upper cap of the sub-frame, pull out
and open the fuse box.
2. Get the blown fuse off, and use the backup
fuse, which is fixed on the fuse box cap, to finish
the replacement. Then, well close the fuse box
and the upper cap of the sub-frame.
Warning:
This motorcycle use enclosed lithium
battery, personally dismantling is
prohibited. Otherwise, will get the
battery to be damaged or cause any
dangers happen.