genata Super power, Руководство по обслуживанию

Страница: 22 / 51

www.genatamotor.eu 22

MOTORCYCLE UNFOLDING
Motorcycle
’s unfolding steps are in the contras to
the motorcycle
’s folding steps.
1. Open the side stand, unfold the rear view
mirrors.
2. Push the seat folding locking plate, which is
positioned on the right side and middle of the
sub-frame, loosen the seat lock, and rotate the
seat upward.
3. At the same time, push and loosen the seat
fast dismantling switch, move the entire fast
dismantling shaft backward, keep rotating the
seat upward, until it
’s in a right position. Then,
move the fast dismantling shaft forward to the
slot of the sub-frame, tighten the nut of the fast
dismantling shaft, push back the fast dismantling
switch to lock the seat support bracket tightly.
4. Unfold the license support bracket.
5. Push the rear fork folding lock plate, which is
positioned on the right side front foot rest, to
loosen the rear fork lock. And then, hold the rear
brake handle, move the motorcycle forward until
the side stand can stand on the ground.
6. User use the right hand to adjust the gradient
of the motorcycle, and use the left hand to put
the fast dismantling shaft into the slot of the rear
fork. Then, tighten the fast dismantling nut, Push
Warning

Before the folding, please switch
off the electricity lock to avoid any
accidents happen.

When the motorcycle is folded,
user can push the vehicle forward.
But in this condition, start the
motor is prohibited. Otherwise, will
cause the damages to the vehicle,
or even hurts the user.