genata Super power, Руководство по обслуживанию

Страница: 12 / 51

www.genatamotor.eu 12

Press the "SELECT" button for the
speedometer in kilometers / miles switch

Press "SETUP" button for the Single
odometer cleared

Press "SETUP" button for 2 seconds to enter
time setting function

Then you press the "SETUP" button to select
the setting items (current project will flash),
then press the "SELECT" button to change
the flashing item to adjust the value (long
press can quickly transform).

After setting a loop or long press "SETUP"
key to exit the settings

Switch operation
1.Turn on the switch, starting the motor and all
function of the vehicle; Turn off the switch, all
electrical source is cut off, then remove the key,
2.High & low beam switch, when open the head
light, Use this switch to change high and low
beam, up is high beam, down is low beam.
3.Turning light switch, when turning or change
road use the switch, the blinker flashs when use
the switch, press the middle button to stop, then
blinker crush out.
4.Horn switch
5. Light switch
Attention
：
To avoid any misunderstanding, Please
stop the turning light after use.