4 / 28
SideStep
®
Industrial
Contents
1 Safety instructions.................................4
2 Mechanical mounting............................4
3 Electrical connections...........................5
4 Changing parameters............................6
5 Automatic initialisation.........................6
6 Menu structure.......................................8
6.1 Service..................................................8
6.2 SetBasics............................................10
6.3 SetFunction.........................................12
6.4 SetCalibration......................................14
6.5 Communication...................................16
7 Parameter table....................................23
1 Safety
instructions
For safety instructions please refer to the
GEMÜ SideStep
®
operating instructions on
the enclosed CD-Rom.
Please contact GEMÜ, if you do not have this
CD-Rom.
2 Mechanical
mounting
WARNING
The equipment is subject to pressure!
®
Risk of severe injury or death!
G
Only work on depressurized plant.
WARNING
Corrosive chemicals!
®
Risk of caustic burns!
G
Wear appropriate protective
gear when installing.
CAUTION
Hot plant components!
®
Risk of burns!
G
Only work on plant that has
cooled down.
CAUTION
Never use the valve as a step or an aid
for climbing!
®
This entails the risk of slipping-o
ff
or
damaging the valve.
CAUTION
Do not exceed the maximum
permissible pressure!
®
Take precautionary measures to avoid
possible pressure surges (water
hammer).
CAUTION
®
If axial forces are set higher than the
factory-set values, this could result in
irreparable damage to the closing seal.
For detailed information on mechanical
mounting please refer to the separate
mounting instructions!
5 / 28
SideStep
®
Industrial
Connection Pin
Signal name
X1
socket
Binder
series 693
1
L1/L+ Supply voltage
2
N/L- Supply voltage
3
Relay output K1
4
Relay output K1
5
Relay output K2
6
Relay output K2
PE
PE-protective earth conductor
Connection Pin
Signal name
X2
M12
socket
A-coded
1
Signal supply, 24V DC
2
Digital input 1 (optional)
3
GND, Signal supply
4
Digital input 2 (optional)
Connection Pin
Signal name
X3
M12
plug
A-coded
1
L+, Direction of travel OPEN
2
GND, Direction of travel OPEN
3
L+, Direction of travel CLOSED
4
GND, Direction of travel CLOSED
5
n.c.
Connection Pin
Signal name
X4
M12
Stecker
B-coded
1
n.c.
2
n.c.
3
RxD, Receive Data, RS 232
4
TxD, Transmit Data, RS 232
5
GND, RS 232
3 Electrical connections
X1
X3
X2
X4
1
2
3
4
1
2
3
4
5
1
2
3
4
5
6
1
2
3
4
