22 / 28
SideStep
®
Industrial
4 Parameter
table
Configuration level
Display
Function
Value range Factory setting
Mode
Select operating modes
AUTO
MAN
OFF
AUTO
1 Service
ActiveParaSet
Displays the current active parameter set
P1...P4
P1
min-Pot-max
Displays travel sensor position in percent
Pot Abs
Travel sensor position
In open : close
Displays the currently connected signal
inputs
PosCtrlOut
Deviation between set value and actual
value
In 1 : 2
Displays the currently connected signals
of the digital inputs
Relais K1:K2
Displays the current position of the
internal outputs
Code
Passwort entry
0...10000
0
Logout
Block access
OK
New Code: 1
Release the lowest priority
0...10000
0
New Code: 2
Release the medium priority
0...10000
0
New Code: 3
Release the top priority
0...10000
0
Error List
Displays error messages
Warnings
Superimpose warnings during operation
ON / OFF
ON
Errors
Superimpose errors during operation
ON / OFF
ON
Clear Error List
Delete error list
OK
hrs.
Displays the operating hours
V: X.X.X.X
Displays the software status
ID
Displays the ID-address
S/N
Displays the serial number
TAG1
TAG no. 1 can be entered
TAG2
TAG no. 2 can be entered
23 / 28
SideStep
®
Industrial
Configuration level Display
Function
Value range
Factory setting
2 SetBasics
Default
Reset to factory setting
Yes / No
Yes
PwrOnMode
Start up behaviour when the supply
voltage is connected
Safe / fast
safe
SpeedAdj
Submenu for setting the speed
StartSpOpe
Starting speed in the OPEN direction
0.0...100.0% 100.0%
StartSpClo
Starting speed in the CLOSED
direction
0.0...100.0% 100.0%
StopSpOpen
Stop speed before reaching the OPEN
end position
0.0...100.0% Start
StopSpClo
Stop speed before reaching the CLOSED
end position
0.0...100,0% Start
ForceAdj
Submenu for setting the maximum axial
forces
InitFOpen
Axial force in the OPEN direction during
initialisation
0.0...55,0%
45.0%*
InitFClose
Axial force in the CLOSED direction
during initialisation
0.0...55,0%
45.0%*
ForceOpen
Axial force in the OPEN direction
0.0...55,0%
45.0%*
ForceClose
Axial force in the CLOSED direction
0.0...55,0%
45.0%*
Init Valve
Starting initialisation
GoClose
Scanning the closed position
GoOpen
Scanning the open position
D.Refresh
Time for display refresh
0.1...1.0s
0.1s
Dlight
Setting the display lighting
OnKey / On
OnKey
AutoReturn
Time for an automatic return to the
working level - Setup
1...60min
5min
HelpText
Superimposes the help text
ON / OFF
ON
HelpLanguage Text language
D / GB
D
* Depends on sizes, valve type and actuator size
3 SetFunction
PosCtrl
Submenu for setting positioner parameters
MinPos
Closing limit = lower position of control
range
0...100%
0.0%
MaxPos
Stroke limitation = upper position of
control range
0...100%
100%
CloseTight
De
fi
nes the range that the valve is closed
under controlled force
0...20%
5.0%
Digital Input
Submenu for setting the digital inputs
In 1
Determines the function of the digital
input „In 1“
OFF/ON
Safe/ON
ParmSetB0
ParmSetB1
OFF
