Unreal
Tournament (UT), you would enter the range 7777 to 27900.
4. Check the protocol you will be using, TCP and/or UDP.
5. Enter the IP address of the PC or network device that you want the port server to go to. For
example,
if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field
provided. Check “Appendix D: Finding the MAC Address and IP Address for Your Ethernet
Adapter” for
details on getting an IP address.
6. Check the
Enable
option for the port services you want to use. Consider the example below:
Customized External Port TCP UDP IP Address Enable
Application
UT 7777 to 27900 X X 192.168.1.100 X
Halflife 27015 to 27015 X X 192.168.1.105 X
PC Anywhere5631 to 5631 X 192.168.1.102 X
VPN IPSEC 500 to 500 X 192.168.1.100 X
When you have completed the configuration, click the
Save Settings
button.
8. I can’t get the Internet game, server, or application to work.
If you are having difficulties getting any Internet game, server, or application to function properly,
consider
exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available
when an
application requires too many ports or when you are not sure which port services to use. Make
sure you
disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding
has priority
over DMZ hosting. (In other words, data that enters the Router will be checked first by the
forwarding settings.
If the port number that the data enters from does not have port forwarding, then the Router will
send the data
to whichever PC or network device you set for DMZ hosting.)
• Follow these steps to set DMZ hosting:
1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the
Router.
Go to the Applications and Gaming => DMZ tab.
2. Disable or remove the entries you have entered for forwarding. Keep this information in case
you
want to use it at a later time.
• Once completed with the configuration, click the
Save Settings
button.
9. I forgot my password, or the password prompt always appears when I am saving settings
to the
Router.
• Reset the Router to factory default by pressing the Reset button for 10 seconds and then
releasing it. If
you are still getting prompted for a password when saving settings, then perform the following
steps:
1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the
Router.
Enter the default password admin, and click the
Administrations
=>
Management
tab.
2. Enter a different password in the Router Password field, and enter the same password in the
second
field to confirm the password.
3. Click the
Save Settings
button.
10. I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up
window.
