Chapter 5: Configuring the PCs
Overview
The instructions in this chapter will help you configure each of your computers to be able to
communicate with
the Router.
To do this, you need to configure your PC’s network settings to obtain an IP (or TCP/IP) address
automatically, so
your PC can function as a DHCP client. Computers use IP addresses to communicate with the
Router and each
other across a network, such as the Internet.
First, find out which Windows operating system your computer is running. You can find out by
clicking the
Start
button. Read the side panel of the Start menu to find out which operating system your PC is
running.
You may need to do this for each computer you are connecting to the Router.
The next few pages tell you, step by step, how to configure your network settings based on the
type of Windows
operating system you are using. Make sure that an Ethernet or wireless adapter (also known as a
network
adapter) has been successfully installed in each PC you will configure. Once you’ve configured
your computers,
continue to “Chapter 6: Using the Router’s Web-Based Utility.”
Configuring Windows 98 and Millennium PCs
1. Click the
Start
button. Select
Settings
and click the
Control Panel
icon. Double-click the
Network
icon.
2. On the Configuration tab, select the
TCP/IP
line for the applicable Ethernet adapter, as shown in
Figure 5-1.
Do not choose a TCP/IP entry whose name mentions DUN, PPPoE, VPN, or AOL. If the word
TCP/IP appears by
itself, select that line. Click the
Properties
button.
3. Click the
IP Address
tab. Select
Obtain an IP address automatically
. (See Figure 5-2.)
IMPORTANT:
Important: By default Windows 98,
2000, Me, and XP has TCP/IP installed and set to
obtain an IP address automatically. If your PC does
not have TCP/IP installed, click Start and then
Help. Search for the keyword TCP/IP. Then follow
the instructions to install TCP/IP.
Figure 5-1: Configuration Tab
Figure 5-2: IP Address Tab
4. Now click the
Gateway
tab, and verify that the Installed Gateway field is blank. Click the
OK
button.
5. Click the
OK
button again. Windows may ask you for the original Windows installation disk or
additional files.
Check for the files at c:\windows\options\cabs, or insert your Windows CD-ROM into your CD-
ROM drive and
check the correct file location, e.g., D:\win98, D:\win9x, etc. (if “D” is the letter of your CD-ROM
drive).
6. Windows may ask you to restart your PC. Click the
Yes
button. If Windows does not ask you to
restart, restart
your computer anyway.
Go to “Chapter 6: Using the Router’s Web-Based Utility.”
Configuring Windows 2000 PCs
