Click the
Start
button when you have chosen a file. After the firmware is written to the Router,
the home page will be loaded automatically. While the Router resets, the
Power
light on the
front panel of the router blinks.
Back to Top
Reset Device
Use the Reset Device function if a system failure occurs. This feature does
not
reload the
factory default settings. It simply resets the device to the network settings that existed on the
device before the system failure occurred. This is equivalent to unplugging the device and
plugging it back in or pressing the reset button for less than 3 seconds until the
Power
light
starts to blink. No settings are lost.
NOTICE:
If you were in the process of updating the network settings, those changes are
lost when the device is reset.
Click the
Start
button to reset the Router to its
current firmware settings
. While the Router is
reset, the
Power
light on the front of the router blinks.
Содержание R921212G
