Gemtek Systems P-380, Руководство пользователя

Страница: 38 / 67

Outdoor Router P-380 Users Guide
6.6.3 SNMP
SNMP (Simple Network Management Protocol) can be configured using the SNMP Settings . Read-
only and read-write communities can be specified here. The Community strings are used for SNMP
authentication purposes. It is possible to allow or deny IP address groups from accessing the P-380
using SNMP. An IP address and netmask combination of 0.0.0.0/32 means “ANY” IP address can
connect. Access can be controlled for one specified IP (for example 192.168.2.100/32) or by a range
(for example 192.168.2.0/24 for IP numbers 192.168.2.1 to 192.168.2.254).
Figure 36 – SNMP settings
Read-Only Community String – community name for read-only access.
Allow Read-Only Community Access from IP – IP address/netmask for read-only community.
Read-Write Community String – community name for read-write access.
Allow Read-Write Access from IP – IP address/netmask for read-write community.
Note: For security purposes, use only local IP addresses for Read/Write access.
Click the Reset button to reset all page fields to their default values or click the Save Settings button
to save the SNMP settings.
6.6.4 Site Survey
The site survey test shows overview information for wireless networks in a local geography. Using this
test, users can scan for working access points, check their operating channels and see signal/noise
levels. To start the scan simply select the
Site Survey menu. The following confirmation message
appears:
Gemtek Systems Page 38