Gemtek Systems P-380, Руководство пользователя

Страница: 18 / 67

Outdoor Router P-380 Users Guide
5.4.2 Connect to the Power Source and the Local Network
1. Connect the Ethernet cable from the P-380 outdoor router to a IEEE 802.3af compliant PoE
hub (48V DC) (Power-over-Ethernet, E-110 PoE Single Port Adapter or E-810 8-Port Switch)
labeled P-LAN OUT.
2. Connect a twisted pair Ethernet cable from the LAN-IN port of the PoE Adapter to a free port
on the hub or switch within the local network.
Power outlet
PoE hub
LAN switch or hub
Figure 10 –Con n ecting P380 to the power source and to the network
5.4.3 Adjusting the P-380 for Best Reception
1. Adjust the orientation of the antenna to get the maximum range. The signal strength LEDs of
the P-380 will show you the best position of the P-380 in client bridge or client router mode.
2. Secure the unit in the position.
You will need to adjust the antennas for inter-building bridge configurations only.
Exact orientation of the antennas is particularly important for long-distance inter-building
links. For more information please refer to the P-380 Specification section.
Figure 11 – Adjusting P-380 for best reception
5.5 Software Installation
Software is needed for setup and management of the P-380 Operator Access Point.
In general, there are four different ways to access the device for configuration:
Windows applications: AP search and AP upgrade
Standard HTML browser (Java and JavaScript enabled)
CLI (command line interface) via telnet or SSH client
Gemtek Systems Page 18