GemOro AuRACLE AGT1, Руководство пользователя

Страница: 18 / 26

If this occurs, first attempt recalibrating the AGT1
as this may remedy the problem. If the REPLACE
PROBE light remains on, the pen probe must be
replaced. Please note that it is recommended
that for best results you should consider replacing
the pen probe if it becomes excessively dirty
from repeated exposure to fake gold or other
contaminates. A probe in this condition will begin
to deliver erratic readings and this is a good
indicator that it should be replaced even without
the “REPLACE PROBE” light illuminating.
HELPFUL SUGGESTIONS:
1. When replacing the battery on the AGT1, only do
so if the AGT1 power switch is in the OFF position.
Always use a high quality, fresh 9V alkaline battery
for best results. Be certain not to lay the AGT1
upside down when inserting the battery or damage
to the AGT1, including its LED’s may occur and
void the warranty.
2. If using an AC adaptor for the AGT1, only use the
specified factory AC adapter or damage to the
AGT1 may occur and void the warranty.
3. The AGT1 is designed to easily test gold and
platinum. However, please keep in mind that
it is not designed to replace the fire assay and
common sense should always be used along with
experience prior to determining the authenticity
and/or karat of gold or whether it is platinum.
4. The AGT1 must be properly calibrated prior
to being used. If this is not done correctly the
accuracy of the AGT1, especially when testing
karat gold above 18K will be compromised.