GEMMA TECHNICAL HELIOS STELLAR, Руководство пользователя

Страница: 12 / 76

12 | G E M M A T E C H N I C A L

The image on the right shows a completed shoulder webbing
installation including shoulder pads

Allow sufficient room between the stainless steel hardware to
install the shoulder pad Velcro tabs

The position of the Chest Strap tri-glides and the Quick Pull
webbing buckles must be parallel on both the left and right
shoulder webbings.

Lengths of the left and right shoulder webbings must be even

Adjust the lengths of the shoulder webbings for a perfect fit
INSTALLING THE SHOULDER PADS

Open the adjustable Velcro straps located on the end of the shoulder pad

Insert the Velcro straps facing up to slots R2 and L2 the close the Velcro to the desired lengths

Shoulder pads are always positioned between your shoulder and the shoulder webbing. The webbing
is on the outside of the pad

Open the Velcro tabs located on each of the pads. Line up the shoulder pads with the webbing

Adjust the length of the shoulder pad or the position of the tri-glides so that there is room between
the tabs and the tri-glides

Note: Number of and design of Velcro straps and tabs may vary on different Shoulder pads
CAUTION: The tri-glides may damage the tabs on the shoulder pads when improperly installed